ATSB releases Broome R44 helicopter accident update


Pilots reported unusual vibrations through the tail rotor pedals in the days leading up to the crash. ATSB Photo

The Australian Transport Safety Bureau has released an update from its ongoing investigation into the fatal accident involving a Robinson R44 helicopter at Broome, Western Australia, on July 4.

Advertisement



“Based on CCTV footage and examination of the wreckage, ATSB investigators have been able to determine that the helicopter’s tail rotor gearbox, tail rotor and tail assembly separated from the helicopter soon after take-off,” said ATSB chief commissioner Greg Hood.

Following the in-flight separation of the tail, the helicopter then fell to the ground, out of control.

“We appreciate that this information may be confronting to the families and friends affected by this tragic accident, and it is for this reason that the ATSB will not be releasing the CCTV footage due to its potentially distressing nature,” Hood said.

Since arriving on site in Broome on Monday, transport safety investigators have conducted a detailed inspection of the helicopter wreckage, and are arranging to transport relevant components back to the ATSB’s technical facilities in Canberra for further examination.

Investigators have also interviewed a pilot who flew the accident aircraft on July 2 who reported feeling unusual vibrations through the tail rotor pedals. The pilot of the accident flight also conducted a short flight in the helicopter and confirmed the unusual vibrations.

Maintenance personnel subsequently conducted a dynamic tail rotor balance on the day before the accident.

Advertisement


The AdButler Logo


“At this stage the reasons for the in-flight breakup, and the significance of the reported vibrations through the tail rotor pedals, are not known, and the ATSB will provide further advice when relevant information is available,” said Hood. “While the investigation is on-going, the ATSB urges any R44 pilot that experiences unusual vibrations through the tail rotor pedals to land as soon as possible.”

As the investigation progresses, the ATSB will continue to liaise with the Civil Aviation Safety Authority, the U.S. National Transportation Safety Board, and the Robinson Helicopter Company.

The Robinson R44 was certified in December 1992 and the model involved in this accident, the R44 Raven I, was introduced in January 2000. There are currently 558 R44s on the Australian civil aircraft register.

 

Related Products

Robinson R44 Raven II
USD $475,547.20
ROBINSON R44 RAVEN II, King KY196A Com, Used, Lycoming , O-540, Airframe Total Time Since New: 1500, Year: 2006

An immaculately presented Raven II fresh from recent major overhaul / rebuild, at 1500 hrs, now ready for immediate delivery and release to service.

Minimum quantity for "Robinson R44 Raven II - 2006" is 1.


R44 Clipper II 2005
USD $563,148.00
ROBINSON R44 CLIPPER II , Dual PRO Aspen PFD / MFD 1000H Pilot Displays, Used, Lycoming , IO-540, Airframe Total Time Since New: 2194, Year: 2005

An immaculately presented Clipper II fresh from recent major overhaul / rebuild, at 2167 hrs, now with only 27 hrs on the clock since release to service in January 2020.

Minimum quantity for "Robinson R44 Clipper II - 2005" is 1.


Robinson R44 RAVEN II 2003
USD $369,000.00
R44 RAVEN II, Used, Lycoming , IO-540-AE1A5 6 cylinder, Year: 2003

For Immediate Sale! First run, freshly overhauled with 2200 hours / Twelve years remaining until next overhaul is due.

  
Social Messaging