The Vertical Flight Society announces winners of the inaugural Design-Build-Vertical Flight Student Competition


The University of Michigan’s Michigan Vertical Flight Technology Team. Vertical Flight Society Photo

The Vertical Flight Society has announced the winners of its inaugural Design-Build-Vertical Flight (DBVF) Competition. The University of Michigan took first place with a prize of $2,000. The team from the University of Maryland took second place and the Ohio State University took third place; the teams will be awarded cash prizes of $1,000 and $500, respectively.

The remote-control electric-powered vertical take-off and landing (eVTOL) DBVF competition seeks to encourage interest in unmanned aircraft technology, and small air vehicle design and fabrication. The competition is designed to develop hands-on skills and familiarization with eVTOL and advanced air mobility (AAM) technology at the university student level, helping to prepare the next generation of engineers and leaders to push the limits of this exciting technology into the future. 

The AdButler Logo

Although the ongoing COVID-19 pandemic forced the cancelation of the fly-off portion of the competition, each team submitted a final technical report and made a virtual presentation of their design and findings to a panel of judges on April 15-16. 

There were a total of seven academic teams that submitted entries in this year’s competition. The 2020-2021 request for proposal (RFP) challenged the teams to build a general aircraft, with requirements restricted to the unmanned aircraft system (UAS) Group 1, which limited the maximum take-off weight (MTOW) to no more than 20 lb (9.1 kg). The RFP and other information is available at www.vtol.org/fly.

Place University Location Team
1st University of Michigan Ann Arbor, Michigan, USA Michigan Vertical Flight Technology
2nd University of Maryland College Park, Maryland, USA Autonomous Micro Air Vehicle
3rd Ohio State University Columbus, Ohio, USA Buckeye Vertical

The remaining teams received the following Honorable Mentions from the judges:

Category University Location Team
Best Drawing Package McGill University Montreal, Quebec, 
Canada
Aero McGill
Most Creative Oregon State University Corvallis, Oregon, USA Beaverhawks 3.0
Best Computational Simulation Pennsylvania State University State College, 
Pennsylvania, USA
Autonomous Robotics Club
Most Manufacturable Vaughn College of Aeronautics and Technology Flushing, New York, USA Vaughn UAV

A total of $5,500 was awarded by VFS during the competition. In addition to the $3,500 in final awards, $2,000 had been awarded previously. In December 2020, each of the seven teams submitted preliminary design report. The results of the judging at that time were as follows:

  • 1st Place: University of Michigan ($750)
  • 2nd Place (Tie): Oregon State University ($500) and Ohio State University ($500)
  • 3rd Place: University of Maryland ($250)

“All of the student teams did really impressive work,” said VFS Executive Director Mike Hirschberg. “Not only did they come up with exciting aircraft designs that had to meet the demanding competition requirements, they also had to deal with all the restrictions and uncertainty caused by COVID-19. They now are better prepared for designing real-life rotorcraft and eVTOL aircraft.”

VFS had intended to hold the competition during the same timeframe at the US Army’s Combat Capabilities Development Command (DEVCOM) Army Research Laboratory (ARL) Robotics Research Collaboration Campus (R2C2) near Aberdeen, Maryland. ARL signed a five-year Educational Partnership Agreement with VFS earlier this year in order to host the event and collaborate on vertical flight education outreach initiatives. Over the past year, ARL conducted significant work in preparing for the flight competition, including extensive planning for flight testing in April under COVID-19 restrictions. The Society is grateful for the US Army’s support of this important educational initiative.

The AdButler Logo

The Vertical Flight Society encourages universities from around the world to form teams and take part in this exciting and challenging competition next year. Preparations are already underway, with the flight testing portion of the competition planned for the ARL R2C2 site next spring. Details will be announced this summer. 

The Vertical Flight Society is the world’s premier vertical flight technical society. Since it was founded as the American Helicopter Society in 1943, the Society has been a major force in the advancement of vertical flight. VFS is the global resource for information on vertical flight technology. For more than 75 years, it has provided global leadership for scientific, technical, educational and legislative initiatives that advance the state of the art of vertical flight.

This press release was prepared and distributed by the Vertical Flight Society.

Related Products

Avfoil Approved
Avfoil Approved
AB6JetQuad
Contact us for a price
An unmanned, scaled-down version of the Harrier Jump-Jet. JetQuad is a drone, also known as UAV or UAS . However, the JetQuad relies on new type of...

Minimum quantity for "AB6 JetQuad Drone" is 1.


ODIN-X HELICOPTER URS
Contact us for a price

ODIN-X Is one of the most reliable helicopter UAS systems on the market it has a large payload in a large operating time to ensure the success of your mission, the 120 minutes endurance outdoes all the other competitors in the market.

Minimum quantity for "ODIN-X HELICOPTER URS" is 1.


AIRSHIP/BLIMP UAS SYSTEM
Contact us for a price

Avfoil offers a full line of airships/blimps from 5 to 12 m or custom for us in aerial photography systems and aerostat Surveillance technology. Our camera blimps have been developed for close range aerial photography, giving you greater versatility and avoiding limitations of other platforms. Whether it is a tethered system, or a fully autonomous system challenger offers the best solutions.

Minimum quantity for "AIRSHIP/BLIMP UAS SYSTEM" is 1.

  
Social Messaging